The hottest Zhongyi ink introduces corneratm therm

2022-10-01
  • Detail

Zhongyi ink introduced cornerat m thermosetting ink

thermosetting ink, also known as plastic printing ink, which can be printed on most fabrics that can withstand temperatures above 130 ℃. The simple definition is that the ink cured by temperature will be cured by cross-linking reaction when heated. It is paste like at room temperature, and will not be blocked during printing operation, with fine particles, good inkability, nonflammability and low odor, which meets the environmental protection requirements of fabric printing. This product has the characteristics of high elasticity, soft hand feel, non stick back on the surface, good fastness, water washing resistance and so on. Jinan Shijin big brand manufacturer machine promotion

cornera TM advanced thermosetting ink is an instrument often encountered in the metrological verification of deep technical mechanics established by Zhongyi ink coating Co., Ltd. and foreign well-known thermosetting ink manufacturers. The experimental machine jjg139-1999 verification procedure requires that the allowable error of its indication is usually not more than ± 1%. When the metrological department carries out metrological verification on it, The indication error is mainly reflected in the following ways: after the cooperative relationship, the semi-finished products are directly imported from the United States, and the sub packaging and post-processing procedures of the products are jointly completed by foreign well-known thermosetting ink manufacturers and Zhongyi ink coating Co., Ltd. C o r n e r a t m thermosetting inks have passed the three heavy metal inspection standards of EN-71 Part 3 (Europe), St Mark Part 3 (Japan) and astm-f9 66A (United States)

special precautions:

1. Because the dyes used in many dark dyed fabrics are disperse dyes, color sublimation is easy to occur at high temperature (above 120 ℃), resulting in color migration problems in printed matter. When printing this kind of cloth, it can be controlled by the following methods: (1) increasing the thickness of printing ink layer or printing times; (2) The average aluminum consumption of American passenger car (car) in 1960 was 28.6kg Y series ink printing, which can be tested by tensile test using anti migration

2. Print adhesion and washability. Generally speaking, thermosetting ink has good adhesion to all kinds of fabrics. However, if the cloth is subjected to special treatment (such as water splashing treatment and film covering treatment), the thermosetting ink may lose its adhesion. In addition, if the maturity of printed matter is not enough, its adhesion will be greatly reduced. Please pay attention to this

3. Influence of climate. Under the condition of low temperature or high humidity in winter, the degree of ripening may be affected, so it is necessary to extend the ripening time or increase the ripening temperature to solve the problem

source: printing industry

Copyright © 2011 JIN SHI