Nie Haitao, chairman of the hottest tengdun techno

  • Detail

Nie Haitao, chairman of tengdun Technology: the core of UAV supervision is to achieve entry management

Nie Haitao, chairman of tengdun Technology: the core of UAV supervision is to achieve entry management

18:49 source://

original title: Nie Haitao, chairman of tengdun Technology: the core of UAV supervision is to achieve entry management

with the gradual improvement of artificial intelligence technology, intelligent hardware such as extruded aluminum profiles, pipes, plates, etc. have begun to be miniaturized, low-cost The direction of low power consumption and the continuous decline of hardware costs have created a good development environment for the UAV manufacturing industry, and further promoted the sustained and stable growth of the scale of the UAV industry. It is predicted that by 2020, the number of UAVs may rise to more than 4 million, and the UAV industry is showing a vigorous development momentum. However, the endless "black flying" also makes how to realize the effective supervision of UAVs a key issue of concern in the industry

tengdun technology, which develops the world's largest commercial UAV, is a company that has attracted much industry attention at present. On the morning of January 24, at the 2019 economic situation seminar of Sichuan chamber of Commerce, Nie Haitao, chairman of tengdun technology, accepted an exclusive interview with daily economy on the supervision, application and development prospects of UAVs

talking about UAV regulation: the core problem is that the consumption of civil UAVs in China has accounted for more than 70% of the global market, and its "sudden emergence" has exceeded the existing prepreg, which is of positive significance for innovation, and has a broad space for development in the future. However, a large number of unmanned aerial vehicles are difficult to achieve comprehensive supervision, and "black flight" events emerge one after another. Moreover, with the popularity of drones, the public will have more and more opportunities to contact drones. Only standardized production and management can reduce safety risks

therefore, not only the UAV industry needs technological innovation, but also the industry is calling for exploring the precise operation services of UAVs and the way in which the regulator carbon fiber reinforced polymer (CFRP) is used in the processing process

niehaitao told the daily economy that the "control" and "release" of UAVs are a dialectical relationship. It said that the "release" that is being talked about now includes low altitude opening and the use of unmanned aerial vehicles, but only by effectively "managing" can we achieve effective "release"

"the core of UAV regulation is to enter." Niehaitao believes that at present, it is mainly from a single individual management. More importantly, it is to use the national public resources - Measurement and control system, data link, etc., and the existing national backbone communication network, 4G and 5g technology to realize the management of unmanned aerial vehicles. "I think the establishment of low altitude communication is the foundation of management"

like cars and aircraft, if UAVs can be guided by reasonable and perfect policies and regulations to enhance users' safety awareness, the safety problems will also be solved

niehaitao said that it is very important to realize the management of unmanned aerial vehicles, "that is to say, without this, you can't play.". It believes that all aircraft use should enter this network, which can also reduce the cost of single point supervision of UAVs

in niehaitao's view, the construction of the standard system must also be considered in the process of UAV supervision. The construction of the standard system must be supported by corresponding regulations, technical means and national awareness

Nie Haitao, chairman of tengdun, is giving a speech

picture source: daily economic level photo

talking about the development of UAV: the prospect is good, but there is a shortage of high-end talents

in fact, the "plastic restriction order" has become a "plastic purchase order". The R & D, manufacturing and application of UAV industry is an important symbol to measure the level of a country's scientific and technological innovation and high-end manufacturing industry. With the continuous reduction of the development and production cost of UAV, its application range will be increasingly extensive. At the end of 2017, the Ministry of industry and information technology issued the guiding opinions on promoting and regulating the development of civil UAV manufacturing industry, which pointed out that by 2020, the civil UAV industry will continue to develop rapidly, with an output value of 60billion yuan and an average annual growth rate of more than 40%

"the United States has 250000 general-purpose aircraft on the list. It is hoped that in ten years, China will reach 20% of the current level of the United States, and there may be 50000 aircraft. Secondly, considering that 10% of them are high-end commercial UAVs, the number is 5000, and 5000 aircraft will be allocated every year for ten years, which is a huge production value." In view of the prospects of the industry, Nie Haitao calculated the accounts

niehaitao said that the Ministry of industry and information technology believes that the output value of civil UAVs will reach 60billion yuan by 2020, and hopes that the output value of the industry will reach 180billion yuan by 2025. These goals are part of "made in China 2025", which aims to improve the level of China's domestic production base, "so we think there is still a great prospect"

according to Nie Haitao, the UAV industry involves the aircraft manufacturing industry and the unmanned and intelligent flight. Therefore, the next stage of integration will develop in two directions: first, we need a highly integrated professional company, which has both strong basic professional capabilities of aircraft and professional capabilities of unmanned flight control; The second is platform companies

Nie Haitao pointed out to the daily economy that there is also a shortage of high-end talents in the UAV industry. "There are many talents in the field of industrial or entertainment UAVs. After all, the required technical expertise is not very wide, but the real top talents are still in short supply."

"now many (people) have mastered some technical control, remote control and network intelligence capabilities, but their basic abilities in engineering mechanics and fluid mechanics still need further precipitation." Nie Haitao further pointed out that the UAV industry looks very hot, but there are many "low-end" ones. "This low-end does not mean the low-end of technology, but the weight and level.". After that, the industry may develop in differentiation, and enterprises will find their own positioning in the differentiation

Copyright © 2011 JIN SHI